Technichal Data
Supply voltage
24V AC/DC, ±10%
Power consumption
max. 100 mA (terminals of supply voltage max. 2.5 A current rating)
Interface
RS485 (not galvanically isolated), GND combined with -/v terminal
Binary Inputs:
galvanically isolated
Voltage
Activated by +/- 24V AC/DC (positive/negative logic)
Current
max. 10mA per channel
Analog Inputs:
Sensors: Pt1000/Ni1000 and others
Resistor 0..19.5 kOhm
Current
max. 1mA per channel
Resolution
16 Bits
Binary Outputs:
Switching voltage max.: 250 VAC / 30 VDC Contact rating: 625 VA / 150 W Maximum switching current (resistive load): 5 A Nominal load (resistive): 2,5 A / 250 VAC; 5 A / 30 VDC Durability: at nominal load 50.000 cycles without load 5.000.000 cycles
Analog Outputs:
0..10 V, max. 10mA
Environmental conditions
Operating temperature 0..50°C Transport and storage temperature -20..+70°C Relative humidity 5..95%, non-condensing
Protection class
IP20
Dimensions
Width x Height x Depth: 72 x 92x 70 mm
Standard installation housing, 4TE
Terminals
Spring-type terminal blocks, 1.0 und 1.5 m² (see page 3)
Mounting
DIN-rail, DIN EN50022
CE compliance
CE Directive 2004/108/EG (EN50081-1, EN50082-2)
CE Directive 2006/95/EG (EN60730)
EN 61000-4-2 / IEC 801-2 Electrostatic discharge ESD Kontact discharge 8 kV / air discharge 8 kV EN 61000-4-5 / IEC 801-5 Surge Signal lines 2 kV EN 61000-4-4 / IEC 801-4 Burst Inputs - outputs +/- 2 kV Power supply AC / DC +/- 2 kV